
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X80ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X80ST is a double-acting JIS compact cylinder engineered to deliver substantial force in tight axial spaces. It generates 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, peaking at a 318 kgf maximum push at 1.0 MPa. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, saving valuable machine footprint depth.
This 63mm bore unit features an 80mm stroke and includes the -S option, meaning it has a built-in piston magnet compatible with AirTAC reed or electronic switches via the sensor grooves around its body. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, so for high-energy cycles, adding an external shock absorber is advised. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X80ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides high-force workholding on machining centers, securely gripping heavy cast iron blocks during milling operations.
Actuates heavy-duty routing gates on automated packaging lines to redirect loaded pallets at high throughput.
Drives bushings and bearings into automotive transmission housings, utilizing the 1558.6 N extend force at 0.5 MPa.
When sizing this 63mm bore actuator, compare its 1558.6 N push at 0.5 MPa against adjacent options: stepping down to the 50mm bore yields 981.8 N, while stepping up to the 80mm bore provides 2513.2 N. Remember that a standard ACQ body does not hold its position if air pressure drops or the valve is centered—the rod will drift, and the fixed NBR bumper only decelerates the end stop without locking the load. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order this exact configuration correctly, confirm the 63mm bore, 80mm stroke, NPT1/4 port thread, the -S magnet option for sensors, and the default female M10x1.5 rod-end thread.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, the ACQ63X80ST uses a fixed NBR elastomer bumper at each end to absorb end-of-stroke impact. It is not a field-adjustable air cushion, so for high-speed or high-mass loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.