
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X80T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 80mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X80T is a double-acting JIS compact cylinder engineered to deliver a substantial 1558.6 N push force at 0.5 MPa alongside a 1401.5 N retract pull. Its space-saving C-clip and riveted piston-to-rod assembly drastically reduce the overall axial footprint compared to conventional round-body alternatives, making it highly effective for machinery where mounting depth is restricted.
This 63 mm bore unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption or a slowed approach. The 20 mm piston rod terminates in a standard female M10x1.5 thread, and while this specific SKU ships without a sensor magnet, the body retains full peripheral grooves for adding AirTAC reed or electronic switches if position feedback is later required. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X80T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 1558.6 N extension force needed to positively eject dense plastic parts from injection molding fixtures without consuming excessive vertical machine height.
Drives heavy-duty diverter arms on logistics conveyor lines, utilizing the 80 mm stroke to push dense cartons securely onto secondary sorting chutes.
Generates reliable clamping pressure on CNC machining centers, holding heavy cast iron blocks firmly in place during aggressive milling operations.
Choosing this 80 mm stroke model balances well within the 100 mm maximum standard stroke limit for the 63 mm bore. If you need to scale down, the adjacent 50 mm bore provides 981.8 N of push at 0.5 MPa; stepping up to the 80 mm bore yields 2513.2 N. Remember that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates near stroke end rather than locking the rod, so deploy an external rod lock or pilot-operated check valve if your application demands fail-safe load holding.
When preparing your RFQ, verify the core ordering parameters: a 63 mm bore, 80 mm stroke, NPT1/4 porting, a female M10x1.5 rod-end thread, and no built-in magnet. Should your assembly require position signaling, you would specify the -S option for the internal magnet.
Quick checklist
The 63 mm bore generates a push force of 1558.6 N and a pull force of 1401.5 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates on filtered air between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to absorb impact, which is not a field-adjustable air cushion; for high kinetic energy loads, you should add an external shock absorber or slow the approach. Furthermore, it does not hold its load if air pressure drops, as the bumper only decelerates the piston near the stroke end rather than locking it.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.