
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X90BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 90mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X90BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod assembly to minimize axial footprint. It produces 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa, utilizing a 20 mm diameter piston rod. This specific configuration includes a male M18x1.5 thread on the rod end, allowing direct, secure coupling to your load.
Instead of an adjustable air cushion, the end caps house fixed NBR elastomer bumpers to absorb impact shocks. The aluminum body features integrated magnetic-switch grooves around its circumference, though this particular SKU ships without the internal magnet. To manage high kinetic energy at cycle speeds up to 500 mm/s, consider adding an external shock absorber or slowing the approach velocity. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X90BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push at 0.5 MPa needed to firmly fold heavy cardboard flaps on continuous packaging lines, using the 90 mm stroke to clear the product path during retraction.
Utilizes the male M18x1.5 rod thread to securely attach a custom pusher head, feeding raw bar material into a collet with precise 90 mm travel and compact axial depth.
Mounts directly onto mold tooling to eject plastic parts, where the fixed NBR bumper absorbs the end-stop impact without requiring the space of a tie-rod cylinder.
When sizing this 63 mm bore actuator, compare its 1558.6 N push force at 0.5 MPa against adjacent options: stepping down, the 50 mm bore yields 981.8 N, while stepping up to the 80 mm bore provides 2513.2 N. Remember that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates near the stroke end. For a fail-safe load hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 63 mm bore, 90 mm stroke, NPT1/4 porting, female thread default overridden by the male M18x1.5 rod end (-B option), and the absence of a sensor magnet.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston. It is not field-adjustable, so for high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.