
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X90SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 90mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X90SBT is a double-acting JIS compact cylinder engineered to deliver robust linear motion within a minimal axial footprint. Utilizing a C-clip and riveted piston-to-rod assembly, the short body design significantly reduces mounting depth compared to conventional round-body units. At 0.5 MPa, this 63 mm bore unit generates 1558.6 N of push force and 1401.5 N of pull force, peaking at a maximum push capacity of 318 kgf at 1.0 MPa.
This specific configuration includes an integrated piston magnet (-S) for triggering AirTAC reed or electronic solid-state switches via the sensor grooves machined around the hard-anodized aluminum body. The -B option designates a male-thread piston rod end (M18x1.5) for direct mechanical coupling to your tooling. Deceleration is handled by fixed NBR elastomer bumpers at each stroke end; because these are not adjustable air cushions, operators should reduce approach speed or utilize external shock absorbers for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X90SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 1558.6 N of extend force at 0.5 MPa to positively eject dense plastic parts from injection molding dies where short machine depth is critical.
Drives a diverting arm on a 50 mm conveyor line, using the 90 mm stroke to push heavy product cartons onto parallel packaging lanes.
Actuates a mechanical flap-folding mechanism on a case packing machine, leveraging the male M18x1.5 rod end for a rigid linkage connection.
When sizing this 90 mm stroke model, compare its 1558.6 N push force at 0.5 MPa against adjacent bores. Stepping down to a 50 mm bore yields 981.8 N of push force, while stepping up to an 80 mm bore provides 2513.2 N. Remember that a standard ACQ body will drift and cannot maintain a locked position if air supply is lost or the directional valve is centered; achieving fail-safe load holding requires adding an external rod lock or a pilot-operated check valve. To order, confirm the 63 mm bore, 90 mm stroke, NPT1/4 port, built-in magnet, and the male M18x1.5 rod thread.
Quick checklist
This 63 mm bore double-acting cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, sustains speeds of 30-500 mm/s, and functions in ambient temperatures from -20 to +70 C.
End-of-stroke deceleration relies on fixed NBR elastomer bumpers, which are not field-adjustable; for high kinetic energy loads, slow the approach speed or add external shock absorbers. For position sensing, the integrated piston magnet works with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.