
The AirTAC ACQ Ultra Thin Air Cylinder ACQ63X90T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 90mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ63X90T is a double-acting JIS compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to round-body units, saving valuable mounting depth within tight machinery envelopes.
This 63 mm bore model incorporates a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than relying on an adjustable air cushion. The Ø20 mm piston rod features a standard female M10x1.5 end thread, and the body retains integrated sensor grooves for position detection, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X90T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 1558.6 N push force required to positively eject dense plastic automotive interior panels from tight mold cavities.
Handles lateral redirection of loaded pallets on roller conveyors, utilizing the compact body to fit within restricted frame widths.
Drives the heavy folding mechanisms on continuous-motion case packers, where the fixed NBR bumper reliably absorbs the repetitive end-stop shock.
For sizing context, stepping down to the 50 mm bore yields 981.8 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513.2 N. The 63 mm bore here offers a strong middle ground for heavier actuation. Note that a plain ACQ cylinder will not hold a load if air pressure drops or the valve is centred; the rod drifts, and the fixed bumper only decelerates near the stroke end. For fail-safe holding, specify an external rod lock or a pilot-operated check valve.
When requesting a quote, confirm this exact configuration: 63 mm bore, 90 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and no sensor magnet. The 90 mm stroke sits well within the 100 mm standard limit for this bore, though long-stroke variants up to 300 mm exist for deeper traverses.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder generates 1558.6 N of push force and 1401.5 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion. If your application requires holding a load without live air pressure, the standard ACQ body will drift, so you must add an external rod lock or pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.