
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X100BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X100BT is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Utilizing a riveted piston-to-rod connection and C-clip body construction, it provides a robust 2513.2 N push at 0.5 MPa alongside a 2267.8 N pull. This specific configuration includes a male-thread piston rod end (M22x1.5) for direct mechanical coupling to your tooling.
Because this model lacks an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both stroke ends to absorb impact energy. The 25 mm piston rod operates within a hard-anodized bore, and the body features integrated magnetic-switch grooves—though this unit ships without the internal magnet. Operating speeds of 30-500 mm/s are achievable across a 0.15-1.0 MPa pressure range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X100BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 2513.2 N extension force needed to eject dense plastic parts from injection molding platens, utilizing the male M22x1.5 thread for secure mold mounting.
Drives press brakes or bending jigs for thick sheet metal, where the 100 mm stroke and 3518.5 N output at 0.7 MPa ensure complete and precise material deflection.
Folds heavy cardboard flaps on automated palletizing lines, relying on the compact C-clip body to fit within tight conveyor framework without sacrificing actuation power.
Selecting this 80 mm bore cylinder is appropriate when your application requires roughly 2500 N of extension force at 0.5 MPa. If you need slightly less power, stepping down to the 63 mm bore yields 1558.6 N of push, while moving up to the 100 mm bore provides 3927.0 N. This 100 mm stroke represents the maximum standard length for this bore size, though longer travels up to 300 mm are available as made-to-order variants.
Keep in mind that a standard double-acting cylinder like this will drift and lose its position if air pressure drops or the directional valve is centered; the fixed NBR bumper only decelerates the piston near the end of its travel and does not function as a locking brake. For fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve. Ensure your order specifies the NPT3/8 port, the male M22x1.5 rod thread, and the absence of the sensor magnet.
Quick checklist
At 0.5 MPa, this 80 mm bore cylinder outputs 2513.2 N of push force and 2267.8 N of pull force. At 0.7 MPa, the push force increases to 3518.5 N. The maximum push capacity is 513 kgf at the 1.0 MPa operating pressure limit.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy; it is not equipped with an adjustable air cushion. Additionally, it does not hold its load if air pressure is lost—the piston will drift, so an external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.