
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X100SBLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X100SBLBT is a double-acting JIS compact air cylinder engineered to deliver a substantial 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces overall axial length compared to traditional round-body units, saving valuable mounting depth in large machinery. The bore is hard-anodized for longevity, and the aluminum body keeps weight manageable despite the 80 mm diameter.
This specific configuration includes a built-in piston magnet for position sensing, a male M22x1.5 threaded rod end for direct load coupling, and an LB mounting bracket interface. Deceleration at stroke ends relies on fixed NBR elastomer bumpers rather than adjustable air cushions, meaning operators should slow the approach speed or add external shock absorbers for heavy 513 kgf maximum loads moving at high velocities. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X100SBLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force at 0.5 MPa to actuate heavy gauge material feeder grippers in automated stamping lines, utilizing the 100 mm stroke for positive part ejection.
The male M22x1.5 thread couples directly to mold ejection plates, while the LB mount secures the body firmly to the platen, handling up to 513 kgf at 1.0 MPa during part extraction.
Deploys the 100 mm stroke to square large pallets or heavy unit loads prior to stretch wrapping, relying on the compact body to fit within tight conveyor framework.
Selecting this 80 mm bore model provides 3518.5 N of push at 0.7 MPa, making it ideal for heavy pressing and lifting. If your application requires slightly less force, stepping down to the 63 mm bore yields 1558.6 N at 0.5 MPa, whereas stepping up to the 100 mm bore provides 3927.0 N at 0.5 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Keep in mind that a standard compact cylinder of this type does not hold its position if air pressure drops or the control valve is centered; the rod will drift. If your machinery requires fail-safe load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 80 mm bore cylinder provides a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It features a 100 mm stroke, which is the maximum standard stroke available for this bore size.
It uses fixed NBR elastomer bumpers at both ends to absorb end stops, which are not adjustable like pneumatic cushions, so high-energy cycles may need external shock absorbers. The included -S magnet allows tracking by AirTAC reed or electronic switches, and the -B code denotes a male M22x1.5 threaded piston rod for direct mounting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.