
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X100SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial mounting depth where a traditional round-body unit would never fit. Operating at this bore size yields 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, making it well suited for heavy-duty positioning tasks.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B, M22x1.5) that couples directly to tooling. The unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop shock rather than an adjustable air cushion, so for high kinetic energy loads you should slow the approach or utilize an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy ejector pins on a 200-ton injection molding press, utilizing the 100 mm stroke to safely push parts clear of the mold cavity.
Diverts heavy loaded pallets onto a secondary packaging line, relying on the 2513.2 N push force to overcome slide friction.
Advances heavy-gauge steel coil material into a mechanical stamping press, using the male M22x1.5 rod end for a rigid tooling connection.
Selecting this 80 mm bore involves sizing against adjacent options: stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. Keep in mind that a plain ACQ-type body does not hold its load if air pressure drops or the valve centers—the rod drifts, and the fixed bumper only decelerates near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 80 mm bore, 100 mm stroke, NPT3/8 port, the -S magnet for reed or electronic switches, and the -B male rod thread.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push capacity is 513 kgf at 1.0 MPa. The maximum standard stroke available for this 80 mm bore is 100 mm, which this model meets exactly.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion or a braking lock. Furthermore, it will not hold a load if air is lost; the piston drifts. For high-speed impacts or fail-safe position holding, you must add external shock absorbers or a dedicated rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.