
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X100ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. Utilizing a riveted piston-to-rod connection and C-clip assembly, this 80 mm bore unit generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, extending to 3518.5 N push at 0.7 MPa. The integrated -S option provides a built-in piston magnet for position sensing.
This model features a robust Ø25 mm piston rod and a NPT3/8 port. Because it operates at the 100 mm maximum standard stroke limit for this bore, it absorbs end-of-travel impacts using a fixed NBR elastomer bumper rather than an adjustable air cushion. For high-energy cycles, operators should add external shock absorption or decelerate the approach, as the internal bumper cannot be tuned. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N push force required to eject dense plastic components from injection molding tools, utilizing the 100 mm stroke to clear the mold cavity entirely.
Acts as a heavy-duty pusher in automated stamping lines, advancing sheet metal blanks into the press with precise 100 mm travel while the NBR bumper absorbs the stopping energy.
Drives the separation and indexing of heavy wooden pallets in high-speed packaging lines, where the Ø25 mm rod withstands significant thrust without side-load deviation.
Selecting the ACQ80X100ST provides 2513.2 N push at 0.5 MPa, sitting between the smaller Ø63 bore offering 1558.6 N and the larger Ø100 bore delivering 3927.0 N. This 80 mm bore with a 100 mm stroke represents the upper limit of the standard range before moving into long-stroke made-to-order territory. Ensure your ordering specification captures the NPT3/8 port, the default female M16x2.0 rod-end thread, and the -S magnet for AirTAC reed or electronic switches.
Remember that a standard compact cylinder like this will not hold a load if air pressure drops or the directional valve is centered; the rod will drift. If your machinery requires fail-safe position holding, you must incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
The ACQ80X100ST generates a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It relies on a fixed NBR elastomer bumper at each end to absorb shock, which is not field-adjustable like an air cushion. For high-speed applications, use external shock absorbers. The -S designation means it has a built-in magnet compatible with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.