
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X10BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X10BT is a double-acting JIS compact cylinder engineered for heavy-duty short-stroke applications, delivering 2513.2 N of push force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial length compared to round-body alternatives, saving valuable machine footprint depth. This specific configuration ships with a male-thread piston rod end (M22x1.5) to couple directly to your load.
This 80mm bore model uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. Since high kinetic energy is common with heavy moving masses at a 10mm stroke, consider slowing the approach or adding an external shock absorber. The aluminum body features integrated magnetic-switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X10BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a robust 2513.2 N push at 0.5 MPa to eject heavy plastic parts from injection molding machines, utilizing the short 10mm stroke and male M22x1.5 rod for direct tool mounting.
Strips sheet metal blanks from press dies using 2267.8 N of pull force, where the compact C-clip body minimizes axial height in tight press tooling enclosures.
Performs short-travel insertion of bearings or pins into automotive housings, relying on the 513 kgf maximum push capacity to seat dense components accurately.
When sizing this 80mm bore, stepping down to the 63mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100mm bore provides 3927.0 N. This ACQ80X10BT configuration provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, peaking at 513 kgf maximum push at 1.0 MPa. Remember that a plain compact cylinder does not hold its load if air pressure is lost or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order, confirm the 80mm bore, 10mm stroke, NPT3/8 port, male M22x1.5 rod thread, and no magnet.
Quick checklist
This 80mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not an adjustable air cushion. If your application involves high speeds or heavy masses, add an external shock absorber. Additionally, it does not hold its load when air is lost; the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.