
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X10SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X10SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing an 80 mm bore and a 10 mm stroke. The riveted C-clip body design drastically reduces overall length compared to standard round-body units, making it ideal for tight machine layouts.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B). The M22x1.5 male thread couples directly to your load, while the integrated magnet allows seamless mounting of AirTAC reed or electronic switches along the body grooves. Deceleration is handled by fixed NBR elastomer bumpers at both ends, absorbing end-stop impact reliably without the complexity of adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X10SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to secure injection mold halves, utilizing the short 10 mm stroke and male M22x1.5 rod for direct, space-saving mounting.
Drives short-stroke stamping operations in metal fabrication, where the compact C-clip body minimizes axial depth and the NBR bumpers absorb high-impact end stops.
Actuates heavy pallet diverters in high-throughput logistics lines, using the integrated magnet to trigger AirTAC electronic sensors for precise positioning.
When sizing this 80 mm bore model, consider stepping down to the 63 mm bore for 1558.6 N push at 0.5 MPa, or stepping up to the 100 mm bore for 3927.0 N push at 0.5 MPa to match your exact force requirements. Confirm your ordering essentials: 80 mm bore, 10 mm stroke, NPT3/8 port, male M22x1.5 rod thread, and the integrated magnet.
Note that a plain ACQ cylinder does not hold its position or load if air pressure is lost or the valve is centered; the piston will drift. The fixed NBR bumpers only decelerate the motion near the stroke end and do not function as a mechanical lock. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This double-acting cylinder delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features an 80 mm bore, 10 mm stroke, NPT3/8 port, 25 mm rod, and operates at 30-500 mm/s.
No, the ACQ80X10SBT uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.