
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X10ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X10ST is a double-acting, single-rod JIS compact cylinder engineered for substantial force in tight axial spaces. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The C-clip and riveted body design drastically reduces overall length compared to traditional round-body units.
This specific model includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require an external shock absorber to prevent impact damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X10ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 10 mm knockout stroke to free plastic parts from injection molds, saving valuable Z-axis clearance inside the machine.
Uses its 2513.2 N extend force at 0.5 MPa to push dense metal stampings off a press bed in automated fabrication lines.
Acts as a robust stop pin in conveyor systems, raising quickly to halt heavy pallets before they enter a machining cell.
Choosing this 80 mm bore involves balancing significant thrust with spatial constraints. If you need slightly less force, the 63 mm bore offers 1558.6 N push at 0.5 MPa; stepping up to the 100 mm bore yields 3927.0 N push. Keep in mind that a standard ACQ does not hold its position if air pressure drops or the valve is centered, as the rod will drift and the bumper only decelerates near the stroke end, so an external rod lock is required for fail-safe holding.
When ordering, verify your requirements for this 10 mm stroke configuration: an 80 mm bore, NPT3/8 port, default female M16x2.0 rod-end thread, and the integrated -S magnet for position sensing.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ80X10ST uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, rather than a field-adjustable air cushion. For high-energy or high-speed cycles, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.