
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X10T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X10T is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. Utilizing a riveted piston-to-rod joint and C-clip assembly, this 80 mm bore unit achieves a 10 mm stroke while conserving machine depth. It supplies 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, making it suitable for heavy-duty short-travel operations.
This model features a 25 mm piston rod and a NPT3/8 port. The female rod-end thread is M16x2.0, providing a robust connection point for your load. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, ensuring reliable end-stop absorption. The body incorporates magnetic-switch grooves, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X10T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a compact 10 mm knockout stroke to eject dense plastic parts from injection molding machinery, leveraging 2513.2 N of push force to break the part free.
Acts as a short-travel locating pin in automated metal stamping presses, holding heavy gauge steel blanks securely in place before the press cycles.
Functions as a robust stopper block in conveyor pallet lift stations, using its high thrust capacity to arrest and hold heavy incoming loads instantly.
Selecting the ACQ80X10T provides 2513.2 N extension force at 0.5 MPa within a very short 10 mm travel. If you need slightly less thrust, the adjacent ACQ63 bore yields 1558.6 N of push at the same pressure. Stepping up to the ACQ100 bore increases the extension capability to 3927.0 N. Keep in mind that a standard compact cylinder like this drifts if air pressure is lost or the valve centers; the fixed NBR bumper only decelerates the piston near the end of travel and will not lock the load. For fail-safe position holding, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 80 mm bore, 10 mm stroke, NPT3/8 port, female M16x2.0 rod thread, and the absence of the sensor magnet.
Quick checklist
The ACQ80X10T generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop energy, which is not an adjustable air cushion. If your application involves high speeds, you should add an external shock absorber. Furthermore, it cannot hold a load without live air pressure; the rod will drift if the valve is centered, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.