
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X15SLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X15SLBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. The C-clip and riveted piston-to-rod assembly shortens the overall body length compared to conventional round-body units, making it highly effective for machinery where axial depth is restricted.
This specific configuration includes an LB mounting bracket for rigid lateral attachment, a built-in magnet (S) for position sensing, and a male-thread piston rod (B) end measuring M22x1.5. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than an adjustable air cushion. Because it is a compact body, lateral loads on the 25 mm rod should be minimized to prevent premature wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X15SLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N push force required to knock finished plastic parts out of injection molds, utilizing the short 15 mm stroke to fit within tight mold clamp spaces.
Ejects stamped metal components from a hydraulic press bed, where the LB mount secures the cylinder laterally and the male rod thread interfaces with the ejector plate.
Acts as a heavy-duty mechanical stop pin to halt loaded pallets on a conveyor line, using the magnetic S option to trigger a solid-state switch and confirm pin extension.
Selecting this 80 mm bore involves evaluating your thrust requirements against neighboring sizes. Stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. If your application demands fail-safe load holding upon air loss or valve centering, note that this cylinder will drift; an external rod lock or pilot-operated check valve is required, as the fixed bumper only decelerates near stroke end.
When ordering, confirm the 80 mm bore, 15 mm stroke, NPT3/8 port, LB bracket interface, and the S magnet option. The male M22x1.5 rod thread couples directly to your load, and the unit operates effectively between 30 and 500 mm/s.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb impact, which are not field-adjustable; for high energy loads, slow the approach or add external shock absorbers. The built-in S magnet allows tracking via AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.