
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X15ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X15ST is a double-acting, single-rod JIS compact cylinder engineered for substantial force in tight axial spaces. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 80 mm bore. The riveted body and C-clip assembly drastically reduce overall depth compared to conventional round-body alternatives.
This specific configuration includes an S option for a built-in piston magnet, allowing seamless integration with AirTAC reed or electronic switches via the body's peripheral grooves. End-stop energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. The 25 mm piston rod features a female M16x2.0 thread, and the air supply connects via a NPT3/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X15ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives short-stroke knockout pins inside injection molding machines where the 2513.2 N extend force efficiently separates finished plastic parts from deep mold cavities.
Applies localized holding pressure on thick sheet metal blanks prior to a stamping press cycle, leveraging the compact footprint to fit within dense tooling layouts.
Acts as a rugged mechanical stop on heavy-duty pallet lifters, using the 15 mm stroke to quickly deploy a 25 mm rod barrier that halts large inbound loads.
Selecting this 80 mm bore model provides a maximum push of 513 kgf at 1.0 MPa. If your application requires slightly less force, the adjacent 63 mm bore yields 1558.6 N of push at 0.5 MPa; stepping up to the 100 mm bore provides 3927.0 N at the same pressure. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered, as the piston will drift and the fixed bumper only decelerates near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is necessary.
When requesting a quote, verify the essentials: 80 mm bore, 15 mm stroke, NPT3/8 port thread, the built-in S magnet, and the default female M16x2.0 rod-end thread.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It relies on a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion, so high-energy cycles may need external shock absorbers. The included S magnet allows tracking using AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.