
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X15T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X15T is a double-acting JIS compact cylinder engineered to deliver 2513.2 N of push force at 0.5 MPa and 3518.5 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to conventional round-body units, saving valuable machine footprint in tight assembly zones.
This 80mm bore variant features a 25mm piston rod, a NPT3/8 port, and a female M16x2.0 rod-end thread for secure load coupling. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, so operators should slow high-speed approaches or add external shock absorption. The body includes sensor grooves, though this specific configuration ships without the magnetic piston. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X15T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N push stroke needed to knock dense plastic parts out of injection molds within a very shallow machinery profile.
Clears stamped metal blanks from press dies where a short 15mm stroke and high 513 kgf maximum push capacity are mandatory.
Crushes and flattens bulky packaging materials against a hard stop, using the compact 80mm body to fit inside tight conveyor frames.
When sizing your pneumatic drive, consider stepping down to the 63mm bore (1558.6 N push at 0.5 MPa) for lighter duties, or up to the 100mm bore (3927.0 N push at 0.5 MPa) if your 15mm stroke needs greater thrust. Remember that a standard ACQ body will drift and lose its held position if air pressure drops or the valve centers; the fixed NBR bumper only decelerates the rod near the stroke end rather than locking it. For fail-safe load holding, specify an external rod lock or a pilot-operated check valve.
To order this exact unit, confirm the 80mm bore, 15mm stroke, NPT3/8 porting, and the default female M16x2.0 piston rod thread. This version omits the sensor magnet, but the body retains full switch groove readiness for future retrofits.
Quick checklist
This 80mm bore cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, and 3518.5 N push at 0.7 MPa. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion. It does not hold its load if air is lost; the rod drifts and the bumper only decelerates it near the end. You must add an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.