
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X20BT is a double-acting JIS compact air cylinder engineered with a short C-clip and riveted body to minimize axial footprint. It provides a substantial 2513.2 N push force at 0.5 MPa alongside a 2267.8 N pull, driven by a 25 mm piston rod. This space-saving architecture is optimal where a traditional round-body unit would exceed the available machine depth.
This specific configuration includes a male M22x1.5 threaded rod end for direct load coupling and utilizes a NPT3/8 supply port. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable cushion, meaning external shock absorbers should be added for high-energy cycles. The body retains magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N extension force needed to knock heavy plastic parts from injection moulding dies, utilizing the short 20 mm stroke to save machine footprint.
Drives heavy-duty stripper plates in stamping presses where the male M22x1.5 rod end threads securely into the tooling plate for positive actuation.
Secures thick sheet metal blanks during hydraulic forming operations, relying on the fixed NBR bumpers to absorb the sudden end-stop impact.
For sizing context, stepping down to the 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N push. This 80 mm model hits a robust middle ground for heavy actuation. Remember that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centred; a fail-safe setup requires an external rod lock or pilot-operated check valve. To order, confirm the 80 mm bore, 20 mm stroke, NPT3/8 port, male M22x1.5 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It uses a NPT3/8 port, a 25 mm rod, and operates at speeds of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the end stop, which is not an adjustable air cushion. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach. Additionally, it does not hold position if air is lost; the rod drifts, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.