
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X20SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing an 80 mm bore and 20 mm stroke. The short C-clip and riveted body design significantly reduces overall length compared to round-body alternatives, saving valuable machine depth.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B) sized at M22x1.5 for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable cushions, meaning high-energy cycles may require external shock absorbers to prevent end-stop wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to eject dense plastic parts from injection molding tools where short machine stroke depth is critical.
Indexes thick metal sheet into a stamping press, using the 20 mm stroke and male M22x1.5 thread for a rigid direct coupling to the feed carriage.
Cycles rapidly at 30-500 mm/s to square misaligned pallets on a conveyor line, relying on the fixed NBR bumper to absorb the firm impact.
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm variant for 1558.6 N push at 0.5 MPa, or up to the 100 mm bore for 3927.0 N push at 0.5 MPa to ensure optimal force matching. Remember that a standard ACQ body does not inherently hold a load if air pressure drops or the valve is centered; the piston will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe positioning. To order this exact unit, confirm the 80 mm bore, 20 mm stroke, NPT3/8 port, S magnet for reed or electronic switches, and B male M22x1.5 rod thread.
Quick checklist
This 80 mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push force of 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
It uses fixed NBR elastomer bumpers at each end to decelerate the piston, which is not an adjustable air cushion or a locking brake. For high-energy cycles, slow the approach or add an external shock absorber. If the load must be held without live air pressure, an external rod lock or pilot-operated check valve is required since the piston will drift upon air loss.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.