
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X20ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X20ST is a double-acting, single-rod JIS compact cylinder engineered for heavy-duty space constraints. A short C-clip and riveted body construction drastically reduces axial mounting depth compared to traditional round-body units, yielding a 20 mm stroke that outputs 2513.2 N of push force at 0.5 MPa. The integrated -S piston magnet enables direct mounting of AirTAC reed or electronic solid-state switches along the body grooves for precise end-of-stroke detection.
Built around an 80 mm bore, this unit features a robust 25 mm piston rod and a NPT3/8 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. Because this bumper is not a lock or brake, external shock absorbers should be added for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X20ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives short-stroke ejector pins on heavy plastic injection molding machines where axial depth is restricted but high stripping force is required.
Actuates heavy-duty bar feeder pushers or secondary chucks on CNC lathes, utilizing the 25 mm rod for rigid, high-thrust part positioning.
Folds heavy corrugated pallet flaps in high-speed packaging lines, using the integrated magnet to trigger solid-state sensors for stroke confirmation.
For sizing, the ACQ80X20ST provides 2513.2 N push at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1558.6 N of push, while moving up to the 100 mm bore provides 3927.0 N. Remember that a standard compact cylinder drifts when air pressure is lost or the valve is centered; if your machine demands fail-safe load holding, specify an external rod lock or pilot-operated check valve. To order, confirm the 80 mm bore, 20 mm stroke, NPT3/8 port, female M16x2.0 rod end, and the -S magnet option.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion. It does not hold its position if air is lost; for fail-safe load holding, an external rod lock or check valve is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.