
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X20T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X20T is a double-acting JIS compact cylinder engineered for substantial actuation within a short axial envelope. Utilizing a C-clip and riveted piston-to-rod assembly rather than a conventional tie-rod framework, it delivers 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. The 80 mm bore pairs with a NPT3/8 port and a 25 mm diameter rod to handle heavy loads efficiently.
This model relies on a fixed NBR elastomer bumper at each end stop to absorb impact energy, meaning it is not a field-adjustable air cushion. For high velocity cycling, slowing the approach or adding external shock absorbers is advised. The body features integrated magnetic switch grooves, though this specific unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X20T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pulling large machined metal inserts out of heavy plastic injection molds using the 2513.2 N extend force within a tight machinery footprint.
Feeding thick steel plate blanks into a forming press where the short 20 mm stroke and high 513 kgf capacity optimize the machine depth.
Actuating heavy-duty stop gates on high-throughput palletizer lines, utilizing the 25 mm rod to halt loads without requiring long axial clearances.
When sizing your pneumatic setup, stepping down to the 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N. This 80 mm unit generates 3518.5 N at 0.7 MPa and a maximum of 513 kgf at 1.0 MPa. Keep in mind that a standard ACQ does not secure a load if air pressure drops or the valve centers; the piston will drift and the bumper only decelerates near the stroke end. For fail-safe holding, specify an external rod lock or pilot-operated check valve. To order, confirm the 80 mm bore, 20 mm stroke, NPT3/8 port, female M16x2.0 rod thread, and no magnet.
Quick checklist
This 80 mm bore cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The operating pressure spans 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at the stroke ends, which is not an adjustable air cushion. If your cycle speed is high, you should slow the approach or mount an external shock absorber. Additionally, it does not hold position on air loss; the rod drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.