
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X25BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X25BT is a double-acting JIS compact air cylinder engineered to deliver substantial force in tight axial envelopes. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, relying on a hard-anodized 80 mm bore for longevity. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body units, saving valuable machine footprint depth.
This specific configuration features a male-thread piston rod end (M22x1.5) for direct load coupling on a 25 mm rod. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high energy impacts may require external shock absorption. The body includes standard magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X25BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to eject heavy plastic parts from injection molding platens where short 25 mm retraction depth is required.
Secures heavy cast iron engine blocks during CNC machining via the male M22x1.5 thread, offering high rigidity without excessive cylinder body length.
Folds cardboard box flaps on heavy-duty palletizing lines, utilizing the 80 mm bore power while fitting within narrow conveyor side frames.
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm variant for 1558.6 N push at 0.5 MPa, or stepping up to the 100 mm bore for 3927.0 N push at 0.5 MPa. The ACQ80X25BT operates at 30-500 mm/s and uses a NPT3/8 port. Ensure your ordering essentials match this exact configuration: 80 mm bore, 25 mm stroke, male M22x1.5 rod thread, and no sensor magnet.
Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the control valve is centered—the rod will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe vertical or suspended loads, specify an external rod lock or a pilot-operated check valve.
Quick checklist
This 80 mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
It uses a fixed NBR elastomer bumper at each end for deceleration, which is not an adjustable air cushion; for high-speed approaches, add external shock absorbers. It does not hold position on air loss, so a fail-safe load requires an external rod lock or pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.