
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X25SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X25SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial mounting depth compared to round-body alternatives. Generating 2513.2 N of push force at 0.5 MPa, this 80 mm bore unit integrates a built-in piston magnet for position sensing and a male M22x1.5 rod end for direct load coupling.
Deceleration is handled by fixed NBR elastomer bumpers at both stroke ends rather than an adjustable air cushion, meaning operators should slow the approach or add external shock absorbers for high-energy impacts. The hard-anodized inner bore ensures durable operation within the 30-500 mm/s speed range, while the integrated magnet supports reed or electronic switches. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X25SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to eject dense plastic parts from injection molding machines, utilizing the male M22x1.5 thread for a rigid coupling.
Drives heavy-duty diverter arms on packaging conveyor lines, where the short C-clip body saves axial depth and the NBR bumper absorbs end-stop shock.
Secures heavy cast iron blocks inside CNC machining centers, relying on the 25 mm stroke and magnetic switch compatibility for precise clamping verification.
When sizing your actuator, note the ACQ80X25SBT yields 2513.2 N push at 0.5 MPa. Stepping down, the 63 mm bore provides 1558.6 N push, whereas stepping up to the 100 mm bore offers 3927.0 N. This 80 mm option bridges that gap perfectly for heavy-duty tasks.
Remember that a plain ACQ-type cylinder will drift and cannot hold a load if air pressure drops or the valve centers; the fixed NBR bumper only decelerates the stroke near its end, not acting as a lock. For fail-safe holding, specify an external rod lock or pilot-operated check valve. To order, confirm the 80 mm bore, 25 mm stroke, NPT3/8 port, male M22x1.5 rod thread, and the integrated magnet.
Quick checklist
This 80 mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb impact, which are not adjustable like an air cushion. Furthermore, it does not hold its load if air is lost; the rod drifts, so an external rod lock is needed for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.