
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X25ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X25ST is a double-acting JIS compact cylinder engineered to deliver 2513.2 N of push force at 0.5 MPa (3518.5 N at 0.7 MPa) over a 25 mm stroke. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space savings are critical.
This 80 mm bore model incorporates a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches via the grooves around its body. End-stopping relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption to prevent impact wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X25ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust stripping force to eject dense plastic parts from injection molds, utilizing the 2513.2 N push capacity within a tight machinery footprint.
Drives bushings or bearings into heavy housings on an automated line, where the 25 mm travel and 3518.5 N force at 0.7 MPa ensure secure seating.
Folds corrugated flaps on large shipping pallets, relying on the Ø25 mm piston rod to resist deflection during high-speed packaging cycles.
Selecting this 80 mm bore involves sizing against adjacent options: stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. The ACQ80X25ST specifies a 25 mm stroke, a NPT3/8 port, a female M16x2.0 rod-end thread, and the -S magnet option.
Remember that a standard compact cylinder like this will not hold a load if air pressure drops or the valve is centered; the rod drifts until the bumper stops it. For fail-safe vertical positioning, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable cushion, so for high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.