
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X25T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X25T is a double-acting JIS compact cylinder engineered to deliver 2513.2 N of push force at 0.5 MPa and 3518.5 N at 0.7 MPa. Utilizing a short C-clip and riveted piston-to-rod assembly, the overall axial length is drastically reduced compared to round-body alternatives, saving valuable machine footprint depth. The 80 mm bore features a hard-anodized inner wall and a robust 25 mm piston rod.
This model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact, meaning it is not a field-adjustable air cushion; for high-energy cycles, you should slow the approach or add an external shock absorber. It features a NPT3/8 port and a female M16x2.0 rod-end thread. The body includes grooves for magnetic switches, but this specific unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X25T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 2513.2 N push stroke needed to eject dense plastic parts from injection molding dies where axial frame depth is highly restricted.
Folds heavy cardboard flaps on automated packaging lines, utilizing the 25 mm stroke and NBR bumpers to absorb the repetitive high-energy end stops.
Drives a short 25 mm stamping action in light metal press operations, where the female M16x2.0 thread securely couples to the upper tooling plate.
When sizing your pneumatic setup, compare this 80 mm bore (providing 2513.2 N push at 0.5 MPa) against the adjacent sizes: step down to a 63 mm bore for 1558.6 N push, or step up to a 100 mm bore for 3927.0 N push. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centred—the rod will drift, and the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
To order this exact configuration, confirm the 80 mm bore, 25 mm stroke, NPT3/8 port, default female M16x2.0 rod thread, and no sensor magnet (non-S). The standard maximum stroke for this bore is 100 mm.
Quick checklist
This 80 mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It uses a NPT3/8 port, a 25 mm rod, and a female M16x2.0 rod-end thread.
No, the cushioning is provided by fixed NBR elastomer bumpers, not an adjustable air cushion; for high-speed cycles, slow the approach or use an external shock absorber. Additionally, while the body has sensor grooves, this model ships without a magnet, so you would need an S-suffix version to use reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.