
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X30BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X30BT is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod. Because the body, barrel, and covers are joined via a C-clip and riveted piston connection rather than long tie rods, it saves mounting depth where a round-body cylinder will not fit.
This specific configuration includes the B option, providing a male M22x1.5 thread on the rod end for a direct, secure coupling to your tooling. Deceleration is handled by a fixed NBR elastomer bumper at each end of the stroke; this is not an adjustable air cushion, so for high kinetic energy loads you should slow the approach or add an external shock absorber. The body features magnetic-switch grooves, though this model ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X30BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N push force required to eject heavy molded plastic automotive panels from the press cavity.
Acts as a robust stopper arm on heavy-duty packaging conveyors, using the male M22x1.5 thread to securely mount a wear pad.
Drives heavy safety doors on large machining centers, benefiting from the short C-clip body to maximize operator aisle space.
When sizing your pneumatic drive, compare this 80 mm bore offering against its neighbors. Stepping down to a 63 mm bore drops the 0.5 MPa push force to 1558.6 N, while stepping up to a 100 mm bore increases it to 3927.0 N, giving you clear scaling options. To finalize your order, confirm the 80 mm bore, 30 mm stroke, NPT3/8 port, and the male M22x1.5 rod thread. Remember that a plain ACQ cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift, so an external rod lock or pilot-operated check valve is required for fail-safe load holding.
Quick checklist
This 80 mm bore cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The air supply connects via a NPT3/8 threaded port.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which cannot be field adjusted. Additionally, while the body has sensor grooves, this specific model ships without the internal magnet, so you cannot use reed or electronic switches without modifying the build.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.