
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X30T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in tight axial envelopes. Operating at 0.5 MPa, it provides 2513.2 N of push force and 2267.8 N of pull force, making it a robust choice for heavy-duty positioning. The riveted piston-to-rod and C-clip assembly drastically reduces overall length compared to round-body alternatives.
This specific configuration features a 25 mm piston rod, a female M16x2.0 rod-end thread, and a NPT3/8 air supply port. Deceleration at the stroke extremes is handled by fixed NBR elastomer bumpers rather than adjustable pneumatic cushions. While the body includes machined grooves for position sensing, this particular unit ships without a magnet, so external mechanical stops or visual indicators are required to confirm travel limits. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X30T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Applies 2513.2 N of push force to secure heavy injection mold halves before resin injection, utilizing the short 30 mm stroke to save valuable machine footprint.
Ejects thick-gauge stamped metal panels from a press die, where the fixed NBR bumper absorbs the repetitive high-energy end-stop impact without requiring adjustment.
Drives a heavy-duty diverter arm on a packaging conveyor to reroute loaded pallets, relying on the 25 mm rod diameter to resist lateral deflection during the transfer.
Selecting this 80 mm bore with a 30 mm stroke offers 2513.2 N of push force at 0.5 MPa. If your application requires slightly less thrust, stepping down to the 63 mm bore yields 1558.6 N of push force. Conversely, if your fixture demands greater power, stepping up to the 100 mm bore provides 3927.0 N of push force. Ensure your ordering essentials are complete: specify the 80 mm bore, 30 mm stroke, NPT3/8 porting, the female M16x2.0 rod thread, and confirm that no internal sensor magnet is needed.
Keep in mind that a standard ACQ body does not inherently hold a load if air pressure is lost or the control valve is centered. The piston will drift, and the fixed NBR bumper only decelerates the motion near the end of the stroke without locking the rod. If your machinery requires fail-safe position holding under pressure loss, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 80 mm bore cylinder delivers 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, 3518.5 N of push force at 0.7 MPa, and a maximum push force of 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa and an operating speed of 30-500 mm/s.
No, the ACQ80X30T uses fixed NBR elastomer bumpers at each end rather than an adjustable pneumatic cushion. For high-speed or high-energy cycles, you should either slow the approach speed via flow controls or mount an external shock absorber to prevent premature wear.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.