
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X35BT is a double-acting JIS compact air cylinder engineered for substantial thrust, generating 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces overall axial length compared to conventional round-body units, conserving valuable machine footprint in tight assemblies.
This specific configuration includes a male-thread piston rod end (M22x1.5) for direct, secure load coupling, alongside a NPT3/8 port. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption to prevent end-stop wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust knockout force to eject heavy plastic parts from injection moulding presses, utilizing the 35 mm stroke for rapid, compact retraction.
Secures heavy sheet metal blanks in press brake setups where high push force and a rigid male-thread rod end ensure positive mechanical coupling.
Actuates heavy diverting arms on high-throughput packaging conveyors to redirect loaded pallets without occupying excessive longitudinal space.
When sizing this 80 mm bore model, consider stepping down to the 63 mm bore for 1558.6 N push at 0.5 MPa, or stepping up to the 100 mm bore for 3927.0 N push at 0.5 MPa. Keep in mind that a standard ACQ body does not inherently hold a load if air pressure drops or the valve centers; the piston will drift, so an external rod lock or pilot-operated check valve is necessary for fail-safe positioning. To order this exact unit, confirm the 80 mm bore, 35 mm stroke, NPT3/8 port, male M22x1.5 rod thread, and no magnet.
Quick checklist
This 80 mm bore cylinder delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at each end for deceleration, not an adjustable air cushion. Additionally, while the body features sensor grooves, this specific model ships without a magnet, so it cannot support reed or electronic switches without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.