
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X35SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X35SBT is a double-acting JIS compact cylinder engineered to deliver substantial thrust in tight axial envelopes. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The short C-clip and riveted body design drastically reduces overall length compared to round-body units, saving valuable machine footprint depth.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches, along with a male-thread M22x1.5 rod end (-B) for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at each end, which are not adjustable, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X35SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 2513.2 N of extend force at 0.5 MPa to secure mid-sized injection mold halves within a short overall machine envelope.
Actuates a heavy routing gate on a packaging conveyor, using the male M22x1.5 thread to mount the diverter linkage directly.
Positions upper press brake tooling with 35 mm of travel, relying on the integrated magnet to trigger reed or solid-state sensors for safe stroke confirmation.
When sizing this 80 mm bore model, stepping down to the 63 mm variant yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N. Remember that a standard ACQ body will not hold a load if air pressure drops or the valve centers; the rod drifts, and the fixed NBR bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order this unit correctly, confirm the 80 mm bore, 35 mm stroke, NPT3/8 port, male M22x1.5 thread, and the sensor magnet.
Quick checklist
This double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb the stop, which are not field-adjustable, so high-speed applications may need external shock absorbers. Additionally, it does not hold its load on air loss; the rod drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.