
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X35ST is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It provides 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The integrated C-clip and riveted piston-to-rod assembly reduce overall length, making it highly effective for machinery where standard round-body units demand excessive mounting depth.
This specific configuration includes a built-in piston magnet (-S) for non-contact position sensing via AirTAC reed or electronic solid-state switches seated in the body's peripheral grooves. End-stop energy is managed by fixed NBR elastomer bumpers rather than adjustable air cushions; for high-velocity cycling, incorporating external shock absorbers or decelerating the approach speed is advisable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X35ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection plates on mid-tonnage plastic injection molding machines, utilizing its 2513.2 N extension force to reliably push finished parts out of the mold cavity.
Acts as a secondary push cylinder on light pneumatic presses to form sheet metal brackets, saving machine depth due to its compact C-clip body architecture.
Folds corrugated cardboard flaps on heavy-duty case erecting lines, where the 25 mm rod and fixed NBR bumpers withstand rapid repetitive end-stop impacts.
For sizing context, stepping down to a 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. The ACQ80X35ST operates at 30-500 mm/s and requires a 35 mm stroke. When ordering, verify the 80 mm bore, 35 mm stroke, NPT3/8 port, female M16x2.0 rod thread, and the required magnetic sensor option. Note that this cylinder will drift if air pressure is lost or the valve is centered; applications requiring fail-safe load holding must incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
No, the ACQ80X35ST uses fixed NBR elastomer bumpers at each end to absorb end-stop shock, not an adjustable air cushion. For high kinetic energy loads or fast cycle speeds, you should slow the approach speed or mount an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.