
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X35T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X35T is a double-acting JIS compact cylinder engineered to deliver substantial force in tight axial spaces. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The C-clip and riveted body design radically shortens overall depth compared to conventional round-body units, making it highly effective for machinery where footprint reduction is critical.
This 80 mm bore model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. Operating effectively between 30-500 mm/s, it features a standard female M16x2.0 rod-end thread for straightforward load coupling. While the body includes grooves for magnetic switches, this specific configuration ships without a piston magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X35T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection pins on mid-sized plastic injection molding machines, utilizing its short body length to fit within tight mold clamp footprints while delivering 2513.2 N of stripping force.
Actuates heavy-duty gripper feeds on automated metal stamping lines, providing the robust push needed to advance thick sheet material precisely before the press cycles.
Raises and lowers loaded pallet stops at conveyor transfer stations, where the fixed NBR bumper effectively absorbs the kinetic energy of the descending load at the 35 mm stroke end.
When sizing this 80 mm bore actuator, stepping down to a 63 mm bore reduces the 0.5 MPa push output to 1558.6 N, while stepping up to a 100 mm bore increases it to 3927.0 N. Choose the ACQ80X35T when your application specifically demands that middle-ground thrust of 2513.2 N across a 35 mm travel distance.
Keep in mind that a standard double-acting cylinder of this type cannot hold a load safely if air pressure drops or the directional valve is centered; the rod will drift, and the NBR bumper only decelerates the piston near the stroke limits without acting as a brake. For fail-safe vertical holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 80 mm bore, 35 mm stroke, NPT3/8 port, female rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends to absorb impact, which cannot be field adjusted like a standard air cushion. Additionally, it does not hold its position if air pressure is lost; the rod will drift. For high-speed impacts, slow the approach or add external shock absorbers, and use an external rod lock for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.