
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 40mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X40ST is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, peaking at a 513 kgf maximum push at 1.0 MPa. The riveted piston-to-rod assembly and C-clip body design radically shorten overall depth compared to conventional round-body units.
This 80 mm bore variant features a 25 mm piston rod, a NPT3/8 port, and a female M16x2.0 rod-end thread. Because this model includes the S option, it has a built-in piston magnet compatible with AirTAC reed or electronic switches mounted in the body grooves. End-stopping relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to eject dense plastic parts from injection molding tools, utilizing the short body depth to fit within tight mold platen clearances.
Raises lower-tier pallets in high-throughput packaging lines, where the 80 mm bore handles heavy structural loads and the S magnet confirms the lift position to the controller.
Drives bearings into automotive housings on a transfer line, relying on the 25 mm rod to maintain rigidity while the fixed NBR bumper absorbs the end-of-stroke impact.
Selecting this 80 mm bore involves balancing your force requirements with spatial constraints. Stepping down to the 63 mm bore drops the 0.5 MPa push to 1558.6 N, while stepping up to the 100 mm bore raises it to 3927.0 N. Keep in mind that a plain compact cylinder like this will drift and cannot hold a vertical load if air pressure is lost or the valve is centered; applying an external rod lock or pilot-operated check valve is necessary for fail-safe positioning.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Quick checklist
At 0.5 MPa, this 80 mm bore cylinder provides 2513.2 N of push force and 2267.8 N of pull force. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, not an adjustable air cushion. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach. Additionally, it cannot hold a load if air pressure drops; the rod will drift, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.