
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X40T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 40mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X40T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in a fraction of the axial depth required by round-body units. Utilizing a C-clip and riveted piston-to-rod assembly, the shortened body conserves machine footprint while providing 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa.
This 80 mm bore unit features a 25 mm piston rod with a standard female M16x2.0 thread for secure load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end stop rather than an adjustable air cushion, meaning high-speed applications should incorporate an external shock absorber to dissipate kinetic energy safely. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X40T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N extension force necessary to positively eject heavy automotive plastic bumpers from injection molding dies.
Pushes heavy-gauge steel blanks into a forming press, utilizing the 25 mm rod to withstand high initial impact resistance upon material contact.
Actuates a heavy-duty routing gate on a packaging conveyor, using the 40 mm stroke to swing large timber pallets onto secondary processing lines.
When sizing this model, consider stepping down to the 63 mm bore for 1558.6 N push at 0.5 MPa, or up to the 100 mm bore for 3927.0 N push at 0.5 MPa. The ACQ80X40T uses a NPT3/8 port and operates effectively across a 30-500 mm/s speed range.
Note that a standard ACQ body lacks fail-safe holding capability; if air pressure drops or the valve centers, the piston will drift and the fixed bumper will only decelerate it near the stroke end. To maintain vertical load position without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your ordering essentials: 80 mm bore, 40 mm stroke, female rod thread, and no sensor magnet.
Quick checklist
This 80 mm bore cylinder generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates within a 0.15-1.0 MPa pressure range at speeds of 30-500 mm/s.
It relies on a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion. Additionally, it does not hold its load if air is lost; the rod will drift, requiring an external rod lock or pilot-operated check valve for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.