
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 45mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X45SBT is a double-acting JIS compact cylinder engineered to deliver substantial force, providing a 2513.2 N push and 2267.8 N pull at 0.5 MPa. Its short C-clip and riveted body construction drastically reduce overall axial length compared to round-body alternatives, saving valuable mounting depth within tight machinery footprints.
This specific configuration includes a built-in piston magnet for positioning via AirTAC reed or electronic switches, alongside a male M22x1.5 threaded rod end for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than an adjustable air cushion, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X45SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 2513.2 N of extension force to positively eject heavy plastic automotive interior panels from an injection molding die.
Uses its 45 mm stroke and male M22x1.5 thread to drive a heavy-duty pop-up sorting arm that redirects loaded timber pallets.
Generates high force over a short stroke to securely fold and compress thick corrugated cardboard flaps prior to case sealing.
When sizing this 80 mm bore model, stepping down to a 63 mm bore yields 1558.6 N of push force at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. The ACQ80X45SBT operates at 30-500 mm/s and uses a NPT3/8 port. Remember that a standard compact cylinder will not hold a load if air pressure drops; the piston drifts and the fixed bumper only decelerates near stroke end, so an external rod lock is needed for fail-safe holding. To order, confirm the 80 mm bore, 45 mm stroke, male M22x1.5 rod thread, and the required magnetic switch.
Quick checklist
The ACQ80X45SBT delivers a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa, and 3518.5 N push at 0.7 MPa. The maximum push force is 513 kgf at 1.0 MPa. It uses a NPT3/8 port and a Ø25 mm piston rod.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not a field-adjustable air cushion or a locking brake, so for high-speed or high-energy cycles you should add an external shock absorber or slow the approach.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.