
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X45T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 45mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X45T is a double-acting JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. It provides 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 80 mm bore and a 25 mm piston rod.
This thin-body design uses a C-clip and riveted piston-to-rod connection to save mounting depth versus round-body units. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. The standard female M16x2.0 rod-end thread couples directly to loads, and the body features grooves for mounting magnetic switches, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X45T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 2513.2 N push force to eject heavy plastic parts from injection molding dies where machine axial depth is restricted.
Presses and flattens corrugated packaging materials on high-speed palletizing lines using its 45 mm stroke and fixed NBR bumper end-stop.
Drives a 25 mm rod to press bearings or pins into housings on automated machining centers operating at 30-500 mm/s.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need slightly less force, the 63 mm bore offers 1558.6 N push at 0.5 MPa; if you need more, the 100 mm bore provides 3927.0 N. Remember that a plain ACQ cylinder will drift and cannot hold a vertical load if air pressure drops or the valve is centered—an external rod lock or pilot-operated check valve is required for fail-safe position holding. When ordering, specify the bore, stroke, NPT3/8 port, female M16x2.0 rod thread, and whether you need the S magnet option for sensors.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ80X45T uses a fixed NBR elastomer bumper at each end to absorb the end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.