
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X50BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X50BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial footprint. It delivers 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing an 80mm bore and a 50mm stroke.
This specific configuration includes a male-thread piston rod end (M22x1.5) for direct load coupling, a 25mm piston rod, and a NPT3/8 port. The bore is hard-anodized for longevity, and it relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X50BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust stripping force to eject heavy plastic parts from injection molding dies, utilizing the 2513.2 N push capacity within a tight machine frame.
Indexes empty pallets into a high-speed packaging line, where the male M22x1.5 rod threads securely into the pusher plate assembly.
Acts as a heavy-duty bar pusher for bar feeders, relying on the compact C-clip body length to fit within strict lathe spindle envelope limits.
When sizing this 80mm bore model, consider stepping down to the 63mm bore for 1558.6 N push at 0.5 MPa, or up to the 100mm bore for 3927.0 N push at 0.5 MPa. The ACQ80X50BT requires a NPT3/8 air connection filtered to 40 um and operates between 0.15-1.0 MPa.
Note that a standard ACQ body will drift and cannot maintain its position if air pressure drops or the valve is centered; the fixed bumper only decelerates the rod near stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 80mm bore, 50mm stroke, male M22x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
The ACQ80X50BT generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and the standard stroke maxes out at 100 mm.
No, it uses fixed NBR elastomer bumpers at the stroke ends to decelerate the piston, not an adjustable air cushion. For high-speed applications, you should add an external shock absorber or slow the approach. It also does not lock the load on air loss; use an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.