
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X50SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X50SBT is a double-acting JIS compact cylinder engineered for substantial actuation tasks, delivering 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space is strictly limited.
This specific configuration includes an S option for a built-in piston magnet, allowing seamless integration with AirTAC reed or electronic switches via the body's peripheral grooves. The B suffix equips the Ø25 mm piston rod with a male M22x1.5 thread for direct load coupling, while the NPT3/8 port manages pneumatic flow. End-stops rely on a fixed NBR elastomer bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X50SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy mold ejector pins in plastic injection machinery, utilizing the 2513.2 N extend force to reliably strip finished parts from deep cavities within a tight machine footprint.
Positions heavy stamping blanks or lower dies in automated metal presses, where the male M22x1.5 rod end secures rigid tooling couplings under high dynamic loads.
Indexes empty pallets into high-speed packaging lines, depending on the 50 mm stroke and NBR fixed bumper to absorb the kinetic energy of repetitive heavy-duty cycling.
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm variant for 1558.6 N push at 0.5 MPa if your load is lighter, or stepping up to the 100 mm bore for 3927.0 N push if you need greater thrust margin. Keep in mind that a standard ACQ body does not inherently hold its position upon air loss or valve centering; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To finalize your order, verify this exact configuration: 80 mm bore, 50 mm stroke, NPT3/8 port, built-in magnet (S), and male M22x1.5 rod thread (B). Operating speed spans 30-500 mm/s within a 0.15-1.0 MPa pressure range.
Quick checklist
This 80 mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
No, the ACQ80X50SBT uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. If your application involves high kinetic energy or rapid cycling, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.