
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X50ST is a double-acting JIS compact cylinder engineered to deliver a robust 2513.2 N push force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body units, making it highly effective for machinery where space is restricted. This 80 mm bore model features a 50 mm stroke and includes a built-in piston magnet for position sensing.
Equipped with a 25 mm piston rod and a NPT3/8 port, this unit handles operating pressures from 0.15-1.0 MPa. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. Because the S option is specified, the integrated magnet works seamlessly with AirTAC reed or electronic switches fitted into the body grooves. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection plates in mid-sized plastic injection molding machines, utilizing the 2513.2 N extend force to reliably strip finished parts from deep cavities.
Acts as a robust pressing cylinder in automated sheet metal bending stations, where the short body length helps minimize overall press footprint.
Raises and lowers heavy diverter gates on pallet conveyor lines, taking advantage of the 2267.8 N retract force to lift and hold mechanical assemblies during transit.
When sizing this model, consider stepping down to the 63 mm bore for a lighter 1558.6 N push at 0.5 MPa, or moving up to the 100 mm bore if you need a higher 3927.0 N output. Remember that a plain compact cylinder like this does not hold its load if air pressure drops or the valve is centered; the piston will drift. For fail-safe positioning, install an external rod lock or a pilot-operated check valve.
To finalize your order, confirm the 80 mm bore, 50 mm stroke, NPT3/8 port, and the built-in magnet (S). The rod end utilizes the default female M16x2.0 thread, and the maximum standard stroke available for this bore size is 100 mm.
Quick checklist
This 80 mm bore double-acting cylinder provides a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force reaches 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not an adjustable air cushion or a locking brake. For high-energy cycles, you should slow the approach or add external shock absorbers. The S option provides a built-in magnet for AirTAC reed or electronic switches, enabling precise end-position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.