
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X50T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X50T is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Utilizing a riveted piston-to-rod connection and C-clip assembly, this thin body design significantly reduces overall length compared to standard round-body options. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, driven through a robust Ø25 mm piston rod.
This 80 mm bore unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact, meaning it is not field-adjustable like a pneumatic cushion. For high-energy cycles, operators should slow the approach or add an external shock absorber. The body features integrated magnetic-switch grooves, though this specific SKU ships without the internal magnet, and the female rod end utilizes an M16x2.0 thread for straightforward load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X50T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N of extend force necessary to push heavy plastic parts out of injection molding tools where short overall length prevents interference with the press platen.
Acts as a robust stopper block in automated pallet handling lines, using its 25 mm rod and fixed NBR bumper to halt 80 kg weight loads without requiring excessive mounting depth.
Secures lower stamping dies into position on hydraulic press beds, utilizing the 2267.8 N retract force to pull and hold the tooling firmly against the machine base.
Selecting this 80 mm bore provides 2513.2 N of extension thrust at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1558.6 N of push, while moving up to the 100 mm bore provides 3927.0 N. Keep in mind that a standard double-acting cylinder like this will drift and lose its position if air pressure drops or the valve is centered; maintaining a load safely requires an external rod lock or a pilot-operated check valve.
When requesting a quote, verify your mounting needs and confirm the 50 mm stroke, the NPT3/8 port size, and the female M16x2.0 rod thread. This configuration omits the sensor magnet, so position detection is not supported unless you source a variant with the -S option.
Quick checklist
This 80 mm bore double-acting cylinder provides a push force of 2513.2 N and a pull force of 2267.8 N at 0.5 MPa. At 0.7 MPa, the push force is 3518.5 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions, so high-speed applications may need external shock absorption. Additionally, while the body has sensor grooves, this specific model lacks the internal magnet required for reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.