
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X5SBT is a double-acting JIS compact cylinder engineered for heavy-duty short-stroke actuation. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The integrated -S magnet enables position sensing via AirTAC reed or electronic switches, while the -B male M22x1.5 rod end threads directly into tooling.
A short C-clip and riveted piston-to-rod connection minimize overall axial length, saving mounting depth where a conventional round-body cylinder cannot fit. Instead of an adjustable air cushion, the ends feature fixed NBR elastomer bumpers that absorb shock at the stroke limits. For high-energy cycles, adding an external shock absorber is advised to prevent premature wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a rapid 5 mm kick-out force of 2513.2 N at 0.5 MPa to eject heavy stamped metal blanks from a press bed without occupying vertical space.
Uses the male M22x1.5 rod end to securely attach a folding arm, delivering high-impact force to tuck corrugated cardboard flaps on a high-speed packaging line.
Applies localized holding pressure against mold halves. The NBR fixed bumper absorbs the sudden stop, while the magnetic switch confirms the 5 mm end-position.
When sizing this 80 mm bore, stepping down to a 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. This ACQ80X5SBT configuration includes a 5 mm stroke, a built-in magnet for sensing, and a male M22x1.5 rod thread. Ensure your ordering essentials match these specifications exactly.
Note that a plain ACQ-type cylinder does not hold its position or load when air pressure is lost or the valve is centered. The rod will drift, and the fixed bumper only decelerates it near the stroke end. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. It uses fixed NBR elastomer bumpers at each end to absorb end-stop impact, which cannot be field-adjusted. It also lacks a rod lock, so the piston drifts when air is lost. For high-speed energy, use an external shock absorber; for position holding, add a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.