
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X5ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X5ST is a double-acting JIS compact cylinder engineered for space-constrained machinery requiring high force over a very short distance. Utilizing a short C-clip and riveted body construction, it significantly reduces axial mounting depth compared to conventional round-body units. At 0.5 MPa, this 80mm bore generates 2513.2 N of push force and 2267.8 N of pull force.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches mounted in the body grooves. The 25mm piston rod features a standard female M16x2.0 thread. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not a field-adjustable air cushion, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X5ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ejecting heavy stampings from a 50-ton mechanical press using a brief 5mm stroke and 2513.2 N of push force at 0.5 MPa.
Cracking the sprue on an injection molding machine where a short 5mm movement under 2267.8 N pull force breaks the part free.
Securing large steel beams in a fabrication welding fixture, relying on the compact C-clip body to fit within the tight tooling envelope.
For sizing context, stepping down to a 63mm bore yields 1558.6 N push, while stepping up to a 100mm bore provides 3927.0 N push at 0.5 MPa. This 80mm model fits perfectly between those two force classes. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift and the fixed bumper only softens the end stop. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 80mm bore, 5mm stroke, NPT3/8 port, female M16x2.0 rod thread, and the required magnetic sensor option.
Quick checklist
The 80mm bore provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100mm.
No. This cylinder uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not an adjustable air cushion. Additionally, it does not feature a locking mechanism; if air is lost, the piston drifts. An external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.