
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X5T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X5T is a double-acting, single-rod JIS compact cylinder engineered for short-trroke, high-force tasks. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod. The riveted C-clip body design significantly reduces overall axial length compared to round-body units, saving valuable machine footprint in tight assemblies.
This 80 mm bore unit features a NPT3/8 port and a female M16x2.0 rod-end thread for secure load coupling. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion. The body includes standard magnetic-switch grooves, though this specific configuration ships without the internal sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X5T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides intense 2513.2 N push force for securing small injection mold halves within a 5 mm travel range before main hydraulic pressure engages.
Drives a short 5 mm staking punch to permanently seat bearing races into housings on an automated assembly line.
Acts as a robust pneumatic latch on industrial CNC enclosure doors, throwing a 5 mm bolt to safely lock heavy guarding panels.
Selecting this 80 mm bore actuator requires balancing your force needs with spatial limits. If 2513.2 N push at 0.5 MPa is excessive, stepping down to the 63 mm bore yields 1558.6 N. Conversely, if your application demands more power, the 100 mm bore provides 3927.0 N. Keep in mind that a plain ACQ body does not hold its load if air pressure drops or the valve centers; the rod will drift. For fail-safe positioning, incorporate an external rod lock or a pilot-operated check valve. When ordering, confirm the 5 mm stroke, NPT3/8 port, female M16x2.0 rod thread, and the non-magnet option.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 2513.2 N push and 2267.8 N pull force. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. End-of-stroke deceleration is handled by a fixed NBR elastomer bumper, which is not field-adjustable; for high energy loads, slow the approach or use an external shock absorber. Additionally, while the body has sensor grooves, this specific model ships without the internal magnet required for AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.