
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X60BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X60BT is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, extending to 3518.5 N push at 0.7 MPa. The C-clip and riveted piston-to-rod assembly keeps the overall body length exceptionally short compared to conventional round-body units, saving valuable machine mounting depth.
This specific configuration includes a male-thread piston rod end (M22x1.5) for direct mechanical coupling to your tooling. The 80 mm bore uses a NPT3/8 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy. Because this is a rigid bumper rather than an adjustable air cushion, operators should slow the approach or utilize an external shock absorber for high-speed cycling. The unit operates between 0.15-1.0 MPa and travels at speeds of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X60BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 2513.2 N push force required to knock heavy stamped metal panels out of progressive dies, utilizing the male M22x1.5 thread for a secure knockout pin interface.
Breaks loose large plastic injection molded parts from core pins, where the compact 60 mm stroke minimizes machine footprint while delivering reliable high-tonnage stripping action.
Actuates heavy diverter gates on packaging palletizer lines, relying on the 80 mm bore's robust thrust to swing loaded pallets without consuming excessive axial frame depth.
Selecting this 80 mm bore model makes sense when your application requires roughly 2513 N of extension thrust at 0.5 MPa. If you need slightly less force, the adjacent 63 mm bore provides 1558.6 N of push at the same pressure. Stepping up to the 100 mm bore yields 3927 N of thrust for heavier payloads. Ensure your specification matches this exact unit: an 80 mm bore, 60 mm stroke, NPT3/8 port, male M22x1.5 rod thread, and no internal sensor magnet.
Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the directional valve centers. The piston will drift, and the NBR bumper only decelerates the rod near the stroke limits rather than locking it. To maintain a fail-safe vertical load, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This double-acting 80 mm bore cylinder provides 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, and 3518.5 N of push at 0.7 MPa. The maximum push force is 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions, so you should externally slow high-speed approaches. Additionally, it lacks a fail-safe lock; the rod drifts if air is lost, requiring an external rod lock or pilot-operated check valve to hold a load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.