
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X60SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It provides 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, reaching 3518.5 N push at 0.7 MPa. The integrated C-clip and riveted piston-to-rod assembly significantly reduce overall length compared to round-body alternatives, saving valuable machine depth.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches for position sensing. It is equipped with a male-thread piston rod end (-B, M22x1.5) for direct load coupling, uses a NPT3/8 supply port, and relies on a fixed NBR elastomer bumper at each end stop rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Delivers 2513.2 N of extend force at 0.5 MPa to secure injection mold halts and heavy tooling plates during processing.
Uses the male M22x1.5 rod thread to mount a diverter blade, smoothly routing heavy pallets on packaging lines.
Provides the robust 2267.8 N retract force needed to extract dense metal blanks from stamping presses.
When sizing this 80 mm bore unit, stepping down to the 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N. To order this exact unit correctly, specify the 80 mm bore, 60 mm stroke, NPT3/8 porting, the integrated magnet (S), and the male M22x1.5 rod thread (B). Note that a plain double-acting cylinder drifts when air is removed or a valve centers; the fixed NBR bumper only decelerates the stroke near the end stops and does not function as a lock. For fail-safe load holding, incorporate an external rod lock or pilot-operated check valve.
Quick checklist
This 80 mm bore cylinder delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features a 25 mm rod, a NPT3/8 port, and a male M22x1.5 rod-end thread.
No, it uses a fixed NBR elastomer bumper at each end to absorb the stop impact, which is not field-adjustable. If operating at high speeds or moving large masses, you should add an external shock absorber or slow the approach velocity.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.