
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X60ST is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod and a NPT3/8 port. The integrated C-clip and riveted body design significantly reduces overall length compared to standard round-body alternatives, saving valuable machine depth.
This 80 mm bore unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. Operating between 30-500 mm/s, this model requires external shock absorbers if cycling heavy loads at high speeds. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X60ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 2513.2 N of extend force to knock heavy stamped metal panels out of progressive dies quickly within a tight press footprint.
Actuates 60 mm stroke diverter gates on packaging palletizers, using the built-in magnet to confirm gate position via electronic sensors.
Drives rigid plastic part strippers away from injection molding cavities, benefiting from the short body length to fit tight mold bases.
Selecting this 80 mm bore involves sizing against its neighbors: stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N. This ACQ80X60ST configuration features a 60 mm stroke (within the 100 mm standard limit for this bore), a female M16x2.0 rod-end thread, and the -S magnet option. Verify that your load coupling avoids side-loading on the compact rod.
Because this is a standard double-acting cylinder, it will not hold its position if air pressure drops or the directional valve is centered. The rod drifts under load, and the fixed NBR bumper only decelerates the piston near the stroke ends rather than locking it. For fail-safe vertical holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 2513.2 N of push force and 2267.8 N of pull force. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa and runs at speeds of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end, which is not a field-adjustable air cushion; high-speed applications may need external shock absorbers. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.