
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X60T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X60T is a double-acting JIS compact cylinder engineered to deliver a robust 2513.2 N push force at 0.5 MPa alongside a 2267.8 N pull. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to traditional round-body units, conserving valuable machine footprint in high-force assemblies.
This 80mm bore unit integrates a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than relying on an adjustable air cushion. The 25mm piston rod features a standard female M16x2.0 thread, and while the body includes magnetic-switch grooves, this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X60T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Supplies 2513.2 N of extension force to secure mid-sized injection mold halves within a short 60mm stroke envelope.
Drives a heavy-duty routing flap on automated packaging conveyors where the compact C-clip body minimizes frame protrusion.
Indexes a secondary bar puller mechanism on CNC lathes, utilizing the 25mm rod and fixed NBR bumpers to handle rapid 60mm shifts.
Providing 2513.2 N of thrust at 0.5 MPa, this 80mm bore sits perfectly between the 63mm option (1558.6 N push) and the 100mm class (3927.0 N push), allowing you to step down for space or up for heavier loads. Keep in mind that a standard ACQ body will drift and cannot hold a vertical load if air pressure drops or the valve centers; the fixed NBR bumper only decelerates the rod near stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 80mm bore, 60mm stroke, NPT3/8 port, female M16x2.0 rod thread, and no magnet.
Quick checklist
This 80mm bore double-acting cylinder provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with speeds of 30-500 mm/s.
No, the ACQ80X60T uses fixed NBR elastomer bumpers at the stroke ends instead of an adjustable air cushion. For high-speed or high-energy cycles, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.