
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X70BFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X70BFBT is a double-acting JIS compact cylinder engineered for substantial actuation tasks, providing 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture drastically reduces axial footprint compared to conventional round-body units, saving valuable machine depth. This specific configuration includes a male-thread piston rod end (M22x1.5) for direct load coupling and an FB mounting bracket for secure front-face attachment.
This 80mm bore model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-speed applications may require external shock absorbers or slowed approach speeds. The piston rod measures 25 mm in diameter, and the body features integrated magnetic-switch grooves, though this particular unit ships without the internal magnet. Operating pressure spans 0.15-1.0 MPa, with a standard speed range of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X70BFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures large injection mold halves during secondary machining operations, utilizing the 2513.2 N extend force to lock heavy tooling securely in place.
Drives heavy-duty pallet diverter arms on high-throughput packaging lines, using the FB bracket to handle significant lateral mounting stresses.
Presses industrial bearings into heavy steel housings on automotive production lines, relying on the rigid 25mm male-thread rod for precise alignment.
When sizing this 80mm bore unit, stepping down to the 63mm bore yields 1558.6 N of push force at 0.5 MPa, while stepping up to the 100mm bore provides 3927.0 N. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Note that a standard compact cylinder will drift and lose its position if air pressure drops or the valve is centered; the fixed NBR bumper only decelerates the piston near stroke end and does not act as a lock. If your application requires fail-safe load holding without live pressure, you must add an external rod lock or a pilot-operated check valve.
Quick checklist
This 80mm bore double-acting cylinder delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push force of 513 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb impact, which is not field-adjustable. Additionally, it does not hold its load if air is lost; the piston will drift, so an external rod lock or pilot-operated check valve is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.