
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X70BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X70BT is a double-acting JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing an 80 mm bore paired with a 70 mm stroke. The short C-clip and riveted body construction significantly reduces overall length compared to round-body alternatives, conserving valuable machine depth.
This specific configuration includes a male-thread piston rod end (M22x1.5) for direct, secure load coupling on a 25 mm diameter rod. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy cycling. The body retains standard magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X70BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N extension force needed to positively eject heavy plastic parts from an injection molding press, saving machine depth with its compact body.
Drives a heavy-duty diverter arm on a packaging conveyor line, using the 70 mm stroke and male M22x1.5 rod thread to push loaded pallets onto a secondary belt.
Actuates a lower press brake tooling bed with high lateral stability, relying on the fixed NBR bumper to absorb the end-stop impact during rapid metal bending cycles.
When sizing your pneumatic drive, stepping down to a 63 mm bore yields 1558.6 N of push force at 0.5 MPa, whereas stepping up to a 100 mm bore provides 3927.0 N. The 80 mm bore strikes a balance with a 3518.5 N push at 0.7 MPa and a maximum push capacity of 513 kgf at 1.0 MPa. Keep in mind that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered; if your application requires fail-safe position holding, incorporate an external rod lock or a pilot-operated check valve.
To order this exact unit, confirm the 80 mm bore, 70 mm stroke, NPT3/8 port thread, male M22x1.5 rod end, and the absence of a sensor magnet. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No. This model uses fixed NBR elastomer bumpers at each end, not an adjustable air cushion, so you should slow the approach or add external shock absorbers for high-speed loads. Additionally, it does not hold position on air loss; the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.