
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X70SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, drastically reducing axial mounting depth compared to round-body alternatives. It delivers a robust 2513.2 N push force at 0.5 MPa and a 3518.5 N push at 0.7 MPa, utilizing a 25 mm piston rod to drive heavy loads.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, fitting directly into the sensor grooves around the body. The -B option provides a male M22x1.5 threaded rod end for direct load coupling, while fixed NBR elastomer bumpers absorb end-stop impact rather than relying on an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Applies high 2513.2 N extension force at 0.5 MPa to secure injection mold halves within a tight machinery footprint.
Uses the 70 mm stroke and male M22x1.5 rod end to push heavy pallets onto secondary packaging conveyor lines.
Ejects stamped metal parts from hydraulic press beds, relying on fixed NBR bumpers to absorb the 30-500 mm/s impact.
For sizing context, stepping down to a 63 mm bore yields 1558.6 N push at 0.5 MPa, while stepping up to a 100 mm bore provides 3927.0 N push at 0.5 MPa. The ACQ80X70SBT operates at 30-500 mm/s with a NPT3/8 port. Remember that a plain compact cylinder drifts when air is lost or a valve is centered; the fixed bumper decelerates the stroke end but does not lock the load, so an external rod lock or pilot-operated check valve is required for fail-safe holding. Confirm the exact mounting bracket (FA/FB/CB/LB) and port thread (NPT on this code) from the datasheet when requesting a quote.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and speeds of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end to absorb impact, which are not field-adjustable; for high energy you should slow the approach or add an external shock absorber. It does not hold its position if air pressure is lost, so an external rod lock or pilot-operated check valve is needed for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.