
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X70ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X70ST is a double-acting JIS compact cylinder engineered to deliver 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod body design drastically reduces axial mounting depth compared to conventional round-body units, saving valuable machine footprint in tight assemblies. The hard-anodized 80mm bore operates at speeds from 30-500 mm/s.
Equipped with a built-in piston magnet (-S), this model accepts AirTAC reed or electronic solid-state switches in the body grooves for precise end-of-stroke positioning. Deceleration is handled by a fixed NBR elastomer bumper at each end—since this is not an adjustable air cushion, operators should slow the approach or add an external shock absorber for high-energy loads. The 25mm piston rod features a standard female M16x2.0 thread end for direct load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X70ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a 70mm stroke pusher arm to square corrugated cardboard cases on a palletizing line using 2513.2 N of extending force at 0.5 MPa.
Actuates an ejection plate on a plastic injection molding machine, utilizing the integrated magnet for solid-state switch feedback to confirm mold ejection.
Positions a heavy-gauge sheet metal backstop on a hydraulic press brake, relying on the compact body to minimize the machine's axial depth.
When sizing this 80mm bore model, stepping down to the 63mm variant yields 1558.6 N push at 0.5 MPa, while stepping up to the 100mm bore provides 3927.0 N push at 0.5 MPa, allowing you to scale force precisely. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered—the rod will drift, and the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding. To order, confirm the 80mm bore, 70mm stroke, NPT3/8 port, integrated magnet (S), and the default female M16x2.0 rod thread.
Quick checklist
This double-acting single-rod cylinder generates 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No, the ACQ80X70ST uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not a field-adjustable air cushion or a locking brake, so for high-speed or high-energy loads, you should slow the approach or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.