
The AirTAC ACQ Ultra Thin Air Cylinder ACQ80X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø80mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ80X70T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in tight axial envelopes. It generates 2513.2 N of push force and 2267.8 N of pull force at 0.5 MPa, utilizing a 25 mm piston rod. The short C-clip and riveted body design significantly reduces overall length compared to round-body units, saving valuable machine footprint depth.
This 80 mm bore unit features a NPT3/8 port and a default female rod-end thread (M16x2.0) for secure load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning high-speed approaches may require external shock absorption. The body includes standard magnetic-switch grooves, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ80X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 2513.2 N push needed to positively eject large automotive interior panels from injection molds before robotic retrieval.
Actuates heavy-duty lane diverter arms on packaging conveyors to route fully loaded pallets into stretch-wrapping stations.
Drives the lower platen of trim presses to shear excess flash from thick-walled rubber gaskets and thermoplastic components.
When sizing this 80 mm bore model, stepping down to the 63 mm bore yields 1558.6 N of push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927.0 N. The ACQ80X70T strikes a balance for medium-heavy handling, operating at 30-500 mm/s. Remember that a plain compact cylinder drifts when air is lost or a valve centers; the fixed bumper only softens the end stop, so an external rod lock or pilot-operated check valve is required for fail-safe load holding. To order, confirm the 80 mm bore, 70 mm stroke, NPT3/8 port, female rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 2513.2 N and the pull force is 2267.8 N. At 0.7 MPa, the push force is 3518.5 N. The maximum push force is 513 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end for deceleration, not an adjustable air cushion. For high-speed impacts, add an external shock absorber. Additionally, the cylinder will drift if air is lost; it cannot hold a load without live pressure, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.